Tripp Lite SVT20KX Owners Manual - Page 17

4. Operation 4.7 LCD Settings There are three parameters to set up the UPS. Refer to the illustration below. Parameter 1 is for program alternatives. Refer to below tables for the programs to set up. Parameter 2 and Parameter 3 are the setting options or values for each program. Note: Use the "Up" or "Down" button to change the programs or parameters. Programs Available for Parameter 1: Code Description Bypass / ECO Standby mode AC mode mode Freq. Converter mode Battery mode Battery Test 01 Output voltage  02 Output frequency  03 Voltage range for bypass  04 Frequency range for bypass  05 ECO mode enable/disable  06 Voltage range for ECO mode  07 Frequency range for ECO mode  08 Bypass mode setting   09 Maximum battery discharge time setting       10 Reserved Reserved for future options 11 Reserved Reserved for future options 12 Neutral loss detection       13 Battery voltage calibration       14 Charger voltage adjustment       15 Inverter A voltage adjustment    16 Inverter B voltage adjustment    17 Inverter C voltage adjustment    18 Output A voltage calibration    19 Output B voltage calibration    20 Output C voltage calibration    A  in chart indicates the program can be set in the mode listed. Note: All parameter settings will be saved only when the UPS shuts down normally with internal or external battery connection. (Normal UPS shutdown means turning off input breaker in Bypass/Standby mode). 17