Tripp Lite 9PX8KHW Eaton 9PX UPS 700-3000 VA 2U Owners Manual - Page 21
Connecting the internal battery
View all Tripp Lite 9PX8KHW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
ENGLISH 3.3 Connecting the internal battery Do not connect the UPS to utility until installation is completed. 3. Installation 2 1 3 4 5 To connect the UPS: 1. Remove the center cover of the front panel. 2. Push left cover toward to right direction. 3. Open the left side of the front panel. A ribbon cable connects the LCD control panel to the UPS. Do not pull on the cable or disconnect it. A small amount of arcing may occur when connecting the internal batteries. This is normal and will not harm personnel. Connect the cables quickly and firmly. 4. Connect the two battery connectors together. 5. Put back the front panel, then clip the center cover. 9PX 1-3 KVA US_EN Page 21
Page 21
9PX 1-3 KVA US_EN
ENGLISH
3. Installation
3.3
Connecting the internal battery
Do not connect the UPS to utility until installation is completed.
3
5
2
1
4
To connect the UPS:
1.
Remove the center cover of the front panel.
2.
Push left cover toward to right direction.
3.
Open the left side of the front panel.
A ribbon cable connects the LCD control panel to the UPS. Do not pull on the cable or
disconnect it.
A small amount of arcing may occur when connecting the internal batteries. This is normal
and will not harm personnel. Connect the cables quickly and firmly.
4.
Connect the two battery connectors together.
5.
Put back the front panel, then clip the center cover.