Toshiba TLP-WX2200U Owners Manual - Page 10
Names of the terminals on the rear panel, Preparing and using the remote control
![]() |
UPC - 032017904279
View all Toshiba TLP-WX2200U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Names of the terminals on the rear panel (1) (2) (3) (4) (6) (8) (9) (5) (7) Name : Main Function (1) CONTROL terminal (2) AUDIO (L/R) terminal (3) VIDEO terminal (4) S-VIDEO terminal (5) AUDIO IN terminal (6) COMPUTER 1 IN terminal (7) AUDIO OUT terminal (8) COMPUTER 2 IN terminal (Also used for MONITOR OUT terminal) (9) Switch : When operating the projector via a computer, connect this to the controlling computer's RS-232C port. p.54 : Input audio signals from video equipment. : Input video signals from video equipment. : Input S video signals from video equipment. : Input audio signals from a computer, or from video equipment with a component video signal output terminal. : Input RGB signal from a computer or other source or a component video signal (Y/PB/PR) from video equipment. : Outputs audio signals. : Inputs RGB signal from a computer or other source or a component video signal (Y/PB/PR) from video equipment. It can also be used as MONITOR OUT terminal by the switch of (9). : Switches between COMPUTER 2 IN and MONITOR OUT. COMPUTER 2 IN (Y/PB/PR 2) /MONITOR OUT 18 Preparing and using the remote control ■ Loading dry-cell batteries into the remote control q Remove the battery cover. w Insert the dry-cell batteries. Be sure to align the plus and minus ends of the batteries properly. ■ Operating the remote control Turn on the ON/OFF switch of the remote control. Point toward the projector's infrared remote sensor, and press a button on the remote control. • Operating the projector from the front Approx. 15° Approx. 5m Two batteries (LR03, SIZE AAA) are used. e Replace the battery cover. When operating the remote control from behind the projector, the light is reflected on the projecting surface and may travel a shorter distance to reach the projector depending on the shape and material of the projecting surface. Dry-cell batteries • Before using the batteries, be sure to observe the Safety Precautions described in previous pages. • Remove batteries from remote control when not using for extended periods. • If the remote control stops working, or if its range decreases, replace all the batteries with new ones. The remote control • When using more than 2 projectors, [Remote control] can make it possible to operate the remote control individually. p.42 • Turn off the ON/OFF switch of the remote control when not in use or to store in baggage. • The remote control may fail to operate if the infrared remote sensor is exposed to bright sunlight or fluorescent lighting. • Do not drop or bang. • Do not leave in hot or humid locations. • Do not get wet or place on top of wet objects. • Do not take apart. • In rare cases, ambient conditions could impede the operation of the remote control. If this happens, point the remote control at the main unit again, and repeat the operation. 19 Preparations
![](/manual_guide/products/toshiba-tlpwx2200u-owners-manual-e836308/10.png)