Toshiba A600 PPA61C-02400K Users Manual Canada; English - Page 88
Power and Power-Up Modes, if required.
View all Toshiba A600 PPA61C-02400K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Hardware, Utilities and Options 4. Turn the computer upside down and remove the battery pack (refer to Replacing the battery pack section in Chapter 6, Power and Power-Up Modes, if required). 5. PORTÉGÉ R600: Loosen the two screws securing the memory module cover in place - please note that this screw is attached to the cover in order to prevent it from being lost. PORTÉGÉ A600: Loosen the one screw securing the memory module cover in place - please note that this screw is attached to the cover in order to prevent it from being lost. 6. Slide your fingernail or a thin object under the cover and lift it off. 7. Push the latches away from the module in order to release it - a spring will force one end of the module up at an angle. 8. Grasp the module by its edges and remove it from the computer. ■ If you use the computer for a long time, the memory modules and the circuits locating close to the memory modules will become hot. In this case, let them cool to room temperature before you replace them. Or you will get burnt if you touch any of them. ■ Do not touch the connectors on the memory module or on the computer. Debris on the connectors may cause memory access problems. Latches Figure 3-14 Removing the memory module (PORTÉGÉ R600) 9. PORTEGE R600: Seat the memory module cover in place and secure it with two screws. PORTEGE A600: Seat the memory module cover in place and secure it with one screw. Take care to ensure that the memory module cover is firmly closed. 10. Install the battery pack - refer to Replacing the battery pack section in Chapter 6, Power and Power-Up Modes, if required. 11. Turn your computer over. User's Manual 3-26