Toshiba A600 PPA61C-02400K Users Manual Canada; English - Page 85
Installing a memory module, Power
View all Toshiba A600 PPA61C-02400K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Hardware, Utilities and Options Installing a memory module To install a memory module, follow the steps as detailed below: 1. Shut down the computer - make sure the Power indicator is off (refer to the Turning off the power section in Chapter 1, Getting Started if required). 2. Remove the AC adaptor and all cables and peripherals connected to the computer. 3. Close the display panel. 4. Turn the computer upside down and remove the battery pack (refer to the Replacing the battery pack section in Chapter 6, Power and PowerUp Modes, if required). 5. PORTÉGÉ R600: Loosen the two screws securing the memory module cover in place - please note that this screw is attached to the cover in order to prevent it from being lost. PORTÉGÉ A600: Loosen the one screw securing the memory module cover in place - please note that this screw is attached to the cover in order to prevent it from being lost. Use a point size 0 Phillips screwdriver. 6. Slide your fingernail or a thin object under the cover and lift it off. Screws Memory module cover Figure 3-9 Removing the memory module cover (PORTÉGÉ R600) Screw Memory module cover Figure 3-10 Removing the memory module cover (PORTÉGÉ A600) User's Manual 3-23