Thermador HDDW36FS User Manual - Page 9
Replacing The Bulbs
View all Thermador HDDW36FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
REPLACING THE BULBS ṇ CAUTION. Avoid risk of electric shock. 1. Switch off the hood and pull out the mains plug or switch off the electricity supply at the fuse box. ṇ CAUTION. Avoid risk of burns. Halogen bulbs become very hot and remain hot for some time after being switched off. 2. Remove the bulb ring with a screwdriver or similar tool. 3. Replace the halogen light bulb (conventional halogen bulb, 12 Volt, max. 20 Watt, G4 bulbholder). IMPORTANT: Plug-in bulbholder. Take hold of the bulb with a clean cloth. Finger prints can shorten bulb life. 4. Re-insert the bulb ring. 5. Restore the power by inserting the mains plug or switching on the fuse. Note: If the light does not function, check that the bulbs have been inserted correctly. PAGE 9