TASCAM US-125M Owners Manual - Page 7

− Names and functions of parts, Front panel, Rear panel

Get TASCAM US-125M PDF manuals and user guides View all TASCAM US-125M manuals
Add to My Manuals
Save this manual to your list of manuals

Page 7 highlights

Front panel 2 − Names and functions of parts 0 MIC IN jack (3.5mm mini-jack) Connect a mic that can use plug-in power here. q PHONES jack (3.5mm stereo mini-jack) Connect headphones here. When headphones are connected, sound is not output from the LINE OUT connectors. Rear panel 1 USB indicator This lights when the USB connection is working properly. 2 SIG (signal) indicator This lights when the input signal exceeds a certain level. 3 OL (overload) indicator This lights when the input signal is too loud. 4 LIMITER button When this is ON, distortion caused by sudden excessive MIC input signals can be prevented. 5 MIC knob Use this to adjust the input level of the MIC IN connectors on the front and rear of the interface. Turn right to increase the level. 6 INST knob Use this to adjust the level input from the INST IN jack. Turn right to increase the level. 7 LINE knob Use this to adjust the level input from the LINE IN jacks. Turn right to increase the level. 8 COMPUTER knob Use this to adjust the level input from the USB port (signal output from the computer). Turn right to increase the level. 9 OUTPUT knob Use this to adjust the level output from the headphones output (PHONES jack) and line outputs (LINE OUT jacks). Turn right to increase the output volume. w MIC IN connector (XLR) Connect a mic here. e MIC IN jack (standard TRS) Connect a mic here. r LOOP MIX switch This sets whether or not the signal output from the computer is returned to the computer after being mixed with other signals (loop mix function). t INST IN jack (standard TRS) Connect a guitar, bass or other high-impedance mono signal source. y LINE IN jacks (RCA pin) Connect a stereo device to the L and R inputs. u LINE OUT jacks (RCA pin) All the inputs (MIC, INST, LINE and COMPUTER) are mixed and output in stereo from the L and R outputs. Connect powered speakers or an amplifier and speaker system here. When headphones are connected to the PHONES jack, no signal is output from these jacks. i USB port Use the included USB cable to connect a computer to the interface here. Power is supplied to the unit through the USB port from the computer or a TASCAM PS-P515U AC adaptor (sold separately). TASCAM US-125M 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
TASCAM US-125M
7
2 − Names and functions of parts
Front panel
1
USB indicator
This lights when the USB connection is working properly.
2
SIG (signal) indicator
This lights when the input signal exceeds a certain level.
3
OL (overload) indicator
This lights when the input signal is too loud.
4
LIMITER button
When this is
ON
, distortion caused by sudden excessive MIC input signals can be
prevented.
5
MIC knob
Use this to adjust the input level of the
MIC IN
connectors on the front and rear of
the interface.
Turn right to increase the level.
6
INST knob
Use this to adjust the level input from the
INST IN
jack. Turn right to increase the
level.
7
LINE knob
Use this to adjust the level input from the
LINE IN
jacks. Turn right to increase the
level.
8
COMPUTER knob
Use this to adjust the level input from the
USB
port (signal output from the
computer). Turn right to increase the level.
9
OUTPUT knob
Use this to adjust the level output from the headphones output (
PHONES
jack) and
line outputs (
LINE OUT
jacks). Turn right to increase the output volume.
0
MIC IN jack (3.5mm mini-jack)
Connect a mic that can use plug-in power here.
q
PHONES jack (3.5mm stereo mini-jack)
Connect headphones here. When headphones are connected, sound is not output
from the
LINE OUT
connectors.
Rear panel
w
MIC IN connector (XLR)
Connect a mic here.
e
MIC IN jack (standard TRS)
Connect a mic here.
r
LOOP MIX switch
This sets whether or not the signal output from the computer is returned to the
computer after being mixed with other signals (loop mix function).
t
INST IN jack (standard TRS)
Connect a guitar, bass or other high-impedance mono signal source.
y
LINE IN jacks (RCA pin)
Connect a stereo device to the L and R inputs.
u
LINE OUT jacks (RCA pin)
All the inputs (MIC, INST, LINE and COMPUTER) are mixed and output in stereo from
the L and R outputs.
Connect powered speakers or an amplifier and speaker system here. When
headphones are connected to the
PHONES
jack, no signal is output from these
jacks.
i
USB port
Use the included USB cable to connect a computer to the interface here. Power is
supplied to the unit through the USB port from the computer or a TASCAM PS-P515U
AC adaptor (sold separately).