TASCAM SS-R250N 32C/TELNET Protocol Specifications Ver1.15 - Page 27
Keyboard Type Sense, Power Contorl, Error Sense, Caution Snese, Vender Command, Vender Command
View all TASCAM SS-R250N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
RS-232C/TELNET Protocol Specifications Ver. 1.15 SS-CDR250N/SS-R250N ・KEYBOARD TYPE SENSE KEYBOARD TYPE SENSE requests the controlled device to return the current keyboard type setting of the controlled device. Command Data Return 5F None KEYBOARD TYPE RETURN [DF] ・POWER CONTORL POWER CONTROL turns ON / OFF (standby) the power of the controlled device. When turning on from OFF, the REMOTE POWER CONTROL setting of the controlled device must be ON. Command 75 Data None Return POWER CONTROL RETURN [F5] Data 1 0 1 8 Data 2 0 1 0 Description Power On Power Off Reset Remarks Power on from the standby state. The controlled device enters the standby state. The controlled device restarts. If the controlled device does not stop, it sends ILLEGAL [F2]. ・ERROR SENSE ERROR SENSE requests the controlled device to return information about an error that occurred on the controlled device. Be sure to determine the error by using this command if the ERROR SENSE REQUEST command [F0] is issued from the controlled device. Command: Data: Return: 78 None ERROR SENSE RETURN [F8] ・CAUTION SNESE CAUTION SENSE requests the controlled device to return information about a caution that is shown on the controlled device. Be sure to check the caution by using this command if the CAUTION SENSE REQUEST command [F1] is issued from the controlled device. Command: Data: Return: 79 None CAUTION SENSE RETURN [F9] ・VENDER COMMAND This command controls a function unique to this unit. For details, see "Vender command details" on page 39. Command: Return: 7F VENDER COMMAND RETURN [FF] - 27 -