TASCAM SERIES 208i Reference Manual - Page 7

Installing the dedicated software To use this unit, a dedicated software must be installed on a computer. The dedicated software might be updated at any time. Download the latest software for the operating system you are using from the TEAC Global Site (http://teac-global.com/). oo On a Windows computer, this will install the Windows driver and Settings Panel application. oo Installing the dedicated software on a Mac will install only the Mac Settings Panel application. The standard OS driver will be used. oo With an iOS device, the standard OS driver will be used, so there is no need to install any. ATTENTION Before starting to install software, quit other applications. Installing the Windows dedicated software Follow the procedures below to install the Windows dedicated software. ATTENTION ii Complete installation of the Windows dedicated software on the computer before connecting the unit to it with the USB cable. ii If you connected the unit to the computer using the USB cable before installing the Windows dedicated software and the "Found New Hardware Wizard" launched, close the Wizard and disconnect the USB cable. Windows dedicated software installation procedures 1. Download the latest Windows dedicated software for the operating system you are using from the TEAC Global Site (http://teac-global.com/) and save it on the computer to be used with the unit. 2. Uncompress the saved software (zip file) on the computer desktop or another location. 3. Double-click the "TASCAM_SERIES_102i_208i_Installer_x. xx.exe" (x.xx is the version number) file in the folder that appears after uncompression to automatically launch the installation software. ATTENTION If you open a zip file without decompressing it and doubleclick the "TASCAM_SERIES_102i_208i_Installer_x. xx.exe" file in the folder that opens, installation will not start. Right-click the zip file and select "Extract All", for example, to decompress it and then try again. 4. Depending on the computer set up, a "Security Warning" or "User Account Control" screens might appear. If this occurs, click the "Yes" button. 3 - Installation 5. Read the contents of the License Agreement, and select "I accept the agreement" if you agree to the terms. Then, click the "Next" button. 6. Next, click the "Install" button. 7. When the Windows security screen appears, click the "Install" button to start installation. 8. The following screen appears when installation has completed. Click the "Finish" button. The installer will quit and the Windows Settings Panel will launch. NOTE The first time you connect the unit by USB to the computer after installing the software, installation of the device driver will be executed. Some time might be necessary before the unit is recognized because Windows Update will be automatically searched at this time. If the unit is still not recognized after a while, open the software installation screen from the notification area at the bottom right of the computer display, and click "Skip obtaining driver software from Windows Update" to stop the search. 7 TASCAM SERIES 102i / SERIES 208i