TASCAM SERIES 208i Reference Manual - Page 13

5 - Using the Settings Panel Opening the Settings Panel You can use the Settings Panel to make settings for the various functions of this unit. Open the Settings Panel in the following manner. NOTE The Settings Panel cannot be used with an iPad or other iOS device. Windows oo From the Start menu select "SERIES 102i_208i" under "TASCAM". Mac oo On the Launchpad, click SERIES 102i_208i. oo Using the Finder, open the Applications folder and double- click SERIES 102i_208i to open the Settings Panel. oo In the Audio Devices window of the Audio MIDI Setup application, right-click (control-click) "SERIES 102i" or "SERIES 208i". Alternatively, click the button and click "Configure device..." from the menu that appears to open the Settings Panel. Settings Panel overview The Settings Panel has three pages. Click a tab at the top of the Settings Panel to open that page. oo MIXER: Make built-in mixer and effect settings. oo INFORMATION: This shows the current status of the driver and information about connections. You can also make various settings. oo ROUTING: Make output settings (and Monitor Control settings for the SERIES 208i). ATTENTION When you open the Settings Panel, the state will be the same as the last time closed. However, the setting values on each page (MIXER, INFORMATION and ROUTING) will be the same as when last closed, but will not have been saved in a scene memory. To save settings in a scene memory, use the Scene Memory menu in the menu bar. (see "Using the SceneMemory menu" on page 24) Moreover, to use settings in standalone mode, they must be saved to the unit. To save settings to the unit, To save settings to the unit, select "Save into the unit" under SceneMemory in the menu bar. (see "Saving Settings Panel settings to the unit" on page 26) MIXER page SERIES 102i Settings Panel MIXER page in Windows SERIES 208i Settings Panel MIXER page in Windows 1 EQUALIZER This unit has a 4-band equalizer (with HIGH, HIGH MID, LOW MID and LOW bands). Use the equalizer to increase or decrease the levels of specific frequency ranges. This can be used, for example, to enhance the sound of individual instruments, to adjust the balance of a wide frequency range and to cut specific unwanted frequencies. (see "This can be selected when set to BROADCAST, but it will always function as MONO." on page 14) Activate the Select button of a channel to make equalizer settings for it. Equalizer settings are shown here for the channel activated using its Select button. TASCAM SERIES 102i / SERIES 208i 13