Sub-Zero ID-24FI Integrated Use & Care Guide - Page 8
Freezer Storage
View all Sub-Zero ID-24FI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
STORAGE Freezer Storage FREEZER BASKETS To remove, pull forward until basket stops. Pull the two plastic tabs located behind the bottom two corners of the basket forward, then lift up and out. Refer to the illustration below. To reinstall, push drawer slides in. Align the basket with slides and push back until it stops. Press down on the front of the basket to engage slides. Refer to the illustration below. If door opening is limited to 90°, the top basket must be removed before removing the middle or lower basket. ICE CONTAINER Column | To remove ice container, pull freezer drawer open until it stops and lift container out. To reinstall, pull drawer carrier out and align the bottom of the container with the carrier. Refer to the illustration below. Tall and drawer | To remove ice container, pull freezer drawer open until it stops and lift container out. To reinstall, place in the drawer with tabs on the bottom of the container aligned with slots in the drawer. Refer to the illustration below. The ice maker must be turned off by touching when the ice storage container is removed. The unit is equipped with a 3-minute delay after the ice container is removed, to ensure cubes are not ejected before ice maker can be deactivated or ice container is reinstalled. Freezer basket removal. Column ice container. Tall and drawer ice container. 8 | Sub-Zero Customer Care 800.222.7820