Stihl MS 880 R MAGNUM174 Instruction Manual - Page 41
Spark Plug.
View all Stihl MS 880 R MAGNUM174 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
When engine begins to fire STOP 0 1 N Set the Master Control lever (1) to the starting throttle position (n). N Press the button to open the decompression valve. N Hold and start your saw as described. As soon as the engine runs STOP 1 0 2 N Blip the throttle trigger (2), the Master Control lever (1) moves to the run position (F) and the engine settles down to idling speed. 550BA003 SC 550BA002 SC 001BA186 KN N Pull the hand guard back towards the front handle. The chain brake is now disengaged - your saw is ready for operation. NOTICE Always disengage chain brake before accelerating the engine. High revs with the chain brake engaged (chain locked) will quickly damage the clutch and chain brake. At very low outside temperatures English position (n) quickly enough after the engine began to fire, the combustion chamber may be flooded. N Move the Master Control lever to the stop position (0). N Remove the spark plug - see "Spark Plug". N Dry the spark plug. N Crank the engine several times with the starter to clear the combustion chamber. N Refit the spark plug - see "Spark Plug". N Set Master Control lever to the starting throttle position (n) - even if the engine is cold. N Press the button to open the decompression valve. N Now start the engine. N Allow engine to warm up at part throttle. Stopping the Engine N Move the Master Control lever to the stop position (0). N Change over to winter operation if necessary - see "Winter Operation". If the engine does not start If you did not move the Master Control lever from the choke closed position (l) to the starting throttle MS 880 39