Stihl MS 660 STIHL Magnum Product Instruction Manual - Page 37
Oil Quantity Control
![]() |
View all Stihl MS 660 STIHL Magnum manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Short-term storage Wait for engine to cool down. Keep the machine with a full tank of fuel in a dry place, well away from sources of ignition, until you need it again. Long-term storage See "Storing the machine" Oil Quantity Control English Oil pump with increased delivery rate (available option) Varying cutting lengths, types of wood and working techniques require varying quantities of oil. Standard oil pump 1 The oil delivery rate can be adjusted as needed using the adjusting screw (1) (on the bottom of the machine). Ematic setting (E), moderate oil delivery rate - N Turn adjusting screw to "E" (Ematic setting) Increase oil delivery rate - N Turn the adjusting screw clockwise Reduce oil delivery rate - N Turn the adjusting screw counterclockwise The saw chain must always be coated with chain oil. 001BA157 KN The oil pump with increased delivery rate can be identified by the groove (2) in the adjusting screw. With this oil pump, in setting range a, the oil tank can run empty before the fuel tank, thus causing the saw chain to run dry. N in setting range a, fill the fuel tank only half full or refill the oil tank when the fuel tank is approximately half empty MS 650, MS 660 35
![](/manual_guide/products/stihl-ms-660-stihl-magnum-product-instruction-manual-9053ae8/37.png)