Stihl MS 660 R STIHL Magnum Product Instruction Manual - Page 54
Specifications
View all Stihl MS 660 R STIHL Magnum manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
English Specifications EPA / CEPA The Emission Compliance Period referred to on the Emissions Compliance Label indicates the number of operating hours for which the engine has been shown to meet Federal emission requirements. Category A = 300 hours B = 125 hours C = 50 hours Engine STIHL single cylinder two-stroke engine MS 650 Displacement: 5.2 cu. in. (84.9 cm3) Bore: 2.05 in. (52 mm) Stroke: 1.57 in. (40 mm) Engine power to ISO 7293: 6.4 hp (4.8 kW) at 9,500 rpm Idle speed: 2,500 rpm Maximum permissi- ble speed with bar and chain: 13,500 rpm MS 660 Displacement: 5.6 cu. in. (91.6 cm3) Bore: 2.13 in. (54 mm) Stroke: 1.57 in. (40 mm) Engine power to ISO 7293: 7.0 hp (5.2 kW) at 9,500 rpm Idle speed: 2,500 rpm Maximum permissi- ble speed with bar and chain: 13,500 rpm Ignition system Electronic magneto ignition (breakerless) Spark plug (suppressed): Electrode gap: NGK BPMR 7 A, Bosch WSR 6 F 0.02 in. (0.5 mm) Fuel system All position diaphragm carburetor with integral fuel pump Fuel tank capacity: 27.9 fl.oz (0.825 l) Chain lubrication Fully automatic, speed-controlled oil pump with reciprocating piston - additional manual oil flow control Oil tank capacity: 12.2 fl.oz (0.36 l) Weight dry, without bar and chain MS 650: 16.5 lbs. (7.5 kg) MS 660: 16.5 lbs. (7.5 kg) MS 660 with wrap around handlebar: 16.8 lbs. (7.6 kg) Cutting attachment Recommended cutting attachments in compliance with Sec. 5.11 of ANSI standard B 175.1-2000 Observe the information about ANSI standard B 175.1-2000 as well as the definition "low-kickback saw chain" in the section "Safety Precautions and Working Techniques". Rollomatic E guide bars STIHL reduced kickback guide bars (with green label) Bar lengths: 20, 25, 28, 32 or 36 in. (50, 63, 70, 80 or 90 cm) Pitch: 3/8" (9.32 mm) Groove width: 0.050 in. (1.3 mm) Sprocket nose: 10-tooth STIHL reduced kickback guide bars (with green label) Bar lengths: 20, 22, 25, 28, 32 or 36 in. (50, 55, 63, 70, 80 or 90 cm) Pitch: 3/8" (9.32 mm) Groove width: 0.063 in. (1.6 mm) Sprocket nose: 10-tooth 52 MS 650, MS 660