Stihl MS 362 C-MQ Product Instruction Manual - Page 41
Oil Quantity Control, Taking Care of the Guide
View all Stihl MS 362 C-MQ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Short-term storage Wait for engine to cool down. Keep the machine with a full tank of fuel in a dry place, well away from sources of ignition, until you need it again. Long-term storage See "Storing the machine" Oil Quantity Control Adjustable flow oil pump is a special option. Different quantities of oil are required for different bar lengths, types of wood and cutting techniques. English Taking Care of the Guide Bar 2 001BA157 KN 143BA026 KN 1 Use the adjusting screw (1) (on underside of machine) to vary the oil feed rate as required. Ematic position (E), medium oil flow rate - N turn the adjusting screw to "E" (Ematic position). To increase oil feed - N turn the adjusting screw clockwise. Turn reduce oil feed - N turn the adjusting screw counterclockwise. The chain must always be wetted with a film of lubricant. 1 3 N Turn the bar over - every time you sharpen the chain and every time you replace the chain - this helps avoid one-sided wear, especially at the nose and underside of the bar. N Regularly clean the oil inlet hole (1), the oilway (2) and the bar groove (3). N Measure the groove depth - with the scale on the filing gauge (special accessory) - in the area used most for cutting. MS 362 39