Stihl MS 362 C-MQ Product Instruction Manual - Page 36
Electric Handle Heating
![]() |
View all Stihl MS 362 C-MQ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
0001BA004 KN 0001BA005 KN English At temperatures below 14°F (-10°C) It is advisable to fit the "cover plate" kit (special accessory) if you use your saw in extremely cold conditions (temperatures below 14°F (-10°C), in powder or drifting snow). If idling behavior is erratic or acceleration is poor N Turn the low speed screw (L) 1/8 of a turn (45°) counterclockwise. It is usually necessary to change the setting of the idle speed screw (LA) after every correction to the low speed screw (L) - see "Adjusting the Carburetor". N If your saw is very cold (frost or ice on machine), start the engine and keep it at a high idle speed (with chain brake disengaged) until it reaches normal operating temperature. Cover plate Fitting the cover plate 2 2 1 N Place the cover plate (1) in position, engage the two tabs (arrows), and secure it with the screws (2). Electric Handle Heating Switching on the handle heating (depending on model) N Move the switch to F - move switch back to 0 to switch off. There is no risk of overheating during long periods of operation. The heating system is maintenance-free. The cover plate (special accessory) helps prevent snow being sucked into the machine. When the cover plate is fitted, the shutter must be in the winter position. In the event of engine running problems, first check that conditions for use of the cover plate still apply. 34 MS 362
![](/manual_guide/products/stihl-ms-362-product-instruction-manual-cd947f2/36.png)