Stihl MS 171 User Guide - Page 94
Removing and Installing, 14.8.3 Manual Fuel Pump, Press Fluid
View all Stihl MS 171 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
14.8.2 Removing and Installing 1 1 533RA403 TG 533RA405 TG 533RA407 TG 1 - Remove the handle frame, b 11.4 : Pry out the tank vent (1) as shown (arrow). Always install a new tank vent. 1 2 2 - Coat seat of tank vent with STIHL Press Fluid, b 16 : Press the tank vent into its seat (arrows) in the handle frame (1) by hand. - Install the handle frame, b 11.4 - Remove the filter base, b 14.2 - Remove the carburetor, b 14.3 : Pull the fuel hose (1) out of the guides (arrows). : Check the fuel hose (1), pull it off the connector (2) and replace if necessary. - Install in the reverse sequence. 2 533RA404 TG 533RA406 TG 533RA408 TG - Disconnect the fuel hose (1), check and replace if necessary. : Push the new tank vent (2) into the fuel hose (1) as far as stop. 1 1 : Push the fuel hose (1) onto the stub (arrow). - Reassemble all other parts in the reverse sequence. - Tightening torques, b 3.5 : Press the retaining tabs (arrows) together and pull out the fuel pump (1). 14.8.3 Manual Fuel Pump - Pull the fuel pump (1) off the fuel hose (2). Not installed in all machine versions. A faulty manual fuel pump must be replaced. MS 171, MS 181, MS 211 93