Stihl MF-MM Instruction Manual - Page 14
Mounting the Deflector
View all Stihl MF-MM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
483BA004 KN 483BA007 KN English - Tighten the first screw moderately. - Tighten the second screw moderately. - Tighten down first screw firmly. - Tighten down second screw firmly. NOTICE It must not be possible to rotate the gearbox on the drive tube. Mounting the Dethatcher NOTICE Left-hand and right-hand dethatchers are different. The direction of rotation is marked with arrows on the gearbox and flange. Make sure both arrows point in the same direction. The spring tines may be damaged or break if the direction of rotation is wrong. 4 5 N Rotate the left-hand dethatcher (4) on the shaft until it can be pushed into position - check the direction of rotation again (arrows). N Insert hitch pin (5) in hole in shaft and snap it into position. N Mount the right-hand dethatcher in the same way. WARNING Always mount both dethatchers. Mounting the Deflector Mounting and Removing the Deflector Extensions Mounting 1 1 N Slide both deflector extensions onto the right and left sides of the deflector, push them fully home at the top and bottom and engage the tab (1). Removing N Use the combination wrench to disengage the tabs (1) and then pull off the extensions. WARNING The deflector extensions divert removed material and debris away from the machine and the operator. Never work without a properly mounted deflector extensions. 12 MF-MM