Stihl HL 91 K Instruction Manual - Page 25
Lubricating the Gearbox
![]() |
View all Stihl HL 91 K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
0000-GXX-1831-A0 0208BA039 KN 0000-GXX-1776-A0 1 2 1 English Lubricating the Gearbox Blade Drive Gear 3 N Fit the cap (1), insert the screw (2) and tighten it down firmly. Lubricate the blade drive gear with STIHL gear lubricant for hedge trimmers 2 - see "Special Accessories". HL 0° version WARNING To reduce the risk of fire and burn injury, use only spark plugs authorized by STIHL. Always press the spark plug boot (1) snugly onto the spark plug terminal (2). Do not use a spark plug with a detachable SAE adapter terminal (3). Arcing may occur that could ignite combustible fumes and cause a fire. This can result in serious injuries or damage to property. N Only use resistor type spark plugs with solid, non-threaded terminals Installing the Spark Plug N Fit the spark plug and tighten it down firmly. N Press the boot firmly onto the spark plug. HL 91 K N Check the lubricant level at regular intervals of about every 25 hours of operation. Unscrew the filler plug (1) - if no grease can be seen on the inside of the filler plug, screw the tube of grease into the filler hole. N Squeeze up to 10 g (2/5 oz) grease into the gearbox. NOTICE Do not completely fill the gearbox with grease. N Unscrew the tube of grease from the filler hole. N Refit the filler plug and tighten it down firmly. 23
![](/manual_guide/products/stihl-hl-91-k-instruction-manual-daf706d/25.png)