Stihl HL 91 K Instruction Manual - Page 16

Approved Power Tool, Attachments, Assembling the Unit

Get Stihl HL 91 K PDF manuals and user guides View all Stihl HL 91 K manuals
Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

0000-GXX-1855-A0 English Approved Power Tool Attachments The following STIHL attachments may be used with the basic power tool: Interchangeable Attachment HL 0°, 500 mm, with cutter guard HL 0°, 600 mm, with cutter guard Application Long reach hedge trimmer Long reach hedge trimmer Assembling the Unit Mounting the Hand Guard If a cap is fitted on the end of the drive tube: Mounting the Gearbox 11 10 10 413BA014 KN N Pull the protective cap off the end of the drive tube and keep it in a safe place. 32 1 54 5 N Loosen the clamp screws (10). N Push the gearbox (11) onto the drive tube (5), turn the gearbox (11) back and forth as necessary. 0000-GXX-5443-A0 N Push the hand guard (1) over the drive tube (2) as far as stop with its convex side facing the control handle (3). N Fit washer (4) on the screw (5). N Insert the screw (5) with washer (4) and tighten it down firmly. 14 HL 91 K

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
HL 91 K
English
14
The following STIHL attachments may
be used with the basic power tool:
Mounting
the Hand Guard
If a cap is fitted on the end of the drive
tube:
N
Pull the protective cap off the end of
the drive tube and keep it in a safe
place.
N
Push the hand guard (1) over the
drive tube (2) as far as stop with its
convex side facing the control
handle (3).
N
Fit washer (4) on the screw (5).
N
Insert the screw (5) with washer (4)
and tighten it down firmly.
Mounting the Gearbox
N
Loosen the clamp screws (10).
N
Push the gearbox (11) onto the
drive tube
(5), turn the gearbox
(11)
back and forth as necessary.
Approved Power Tool
Attachments
Interchangeable
Attachment
Application
HL 0°, 500 mm,
with cutter guard
Long reach hedge
trimmer
HL 0°, 600 mm,
with cutter guard
Long reach hedge
trimmer
Assembling the Unit
413BA014 KN
1
2
3
5
4
0000-GXX-5443-A0
0000-GXX-1855-A0
10
10
11
5