Stihl HL 100 K 0186 Product Instruction Manual - Page 27
Sharpening Instructions, Storing the Machine
![]() |
View all Stihl HL 100 K 0186 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
0° version Sharpening Instructions English Storing the Machine Adjustable 135° version N Check the lubricant level at regular intervals of about every 25 hours of operation. Unscrew the filler plug (2) - if no grease can be seen on the inside of the filler plug, screw the tube of grease into the filler hole. N Squeeze up to 5 g (1/5 oz) grease into the gearbox. NOTICE Do not completely fill the gearbox with grease. N Refit the filler plug and tighten it down firmly. When cutting performance and behavior begin to deteriorate, i.e. blades frequently snag on branches: Resharpen the cutting blades. It is best to have the cutting blades resharpened by a dealer on a workshop sharpener. STIHL recommends a STIHL servicing dealer. It is also possible to use a flat crosscut sharpening file. Hold the sharpening file at the prescribed angle (see "Specifications"). N Only sharpen the cutting edge - do not file blunt projecting parts of the cutting blade or the cutting blade guard (see "Main Parts and Controls") N Always file towards the cutting edge. N The file only sharpens on the forward stroke - lift it off the blade on the backstroke. N Use a whetstone to remove burr from cutting edge. N Remove as little material as possible. N After sharpening, clean away filing or grinding dust and then spray the cutting blades with STIHL resin solvent. NOTICE Do not operate your machine with dull or damaged cutting blades. This may cause overload and will give unsatisfactory cutting results. For periods of 3 months or longer N Drain and clean the fuel tank in a well ventilated area. N Dispose of fuel properly in accordance with local environmental requirements. N Run the engine until the carburetor is dry - this helps prevent the carburetor diaphragms sticking together. N Clean the cutting blades, check condition and spray with STIHL resin solvent. N Fit the blade scabbard. N Thoroughly clean the machine - pay special attention to the cylinder fins and air filter. N Store the machine in a dry, high or locked location. Out of the reach of children and other unauthorized persons. HL 100, HL 100 K 25
![](/manual_guide/products/stihl-hl-100-135186-product-instruction-manual-7709fc8/27.png)