Stihl HL 100 135186 Product Instruction Manual - Page 26
Lubricating the Gearbox
![]() |
View all Stihl HL 100 135186 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
English Fit a new spark plug after approx. 100 operating hours or earlier if the electrodes are badly eroded. 1 Lubricating the Gearbox Blade Drive Gear Lubricate the blade drive gear with STIHL gear lubricant for hedge trimmers (Special Accessory). 0° version plug (1) - if no grease can be seen on the inside of the filler plug, screw the tube of grease into the filler hole. N Squeeze up to 5 g (1/5 oz) grease into the gearbox. NOTICE Do not completely fill the gearbox with grease. N Refit the filler plug and tighten it down firmly. Angle Drive Lubricate the angle drive with STIHL gear lubricant for brushcutters (Special Accessory). 000BA036 TR WARNING To reduce the risk of fire and burn injury, use only spark plugs authorized by STIHL. Always press spark plug boot (2) snugly onto spark plug terminal (1) of the proper size. (Note: If terminal has detachable SAE adapter nut, it must be attached.) A loose connection between spark plug boot and ignition wire connector in the boot may create arcing that could ignite combustible fumes and cause a fire. Adjustable 135° version N Check the lubricant level at regular intervals of about every 25 hours of operation. Unscrew the filler 24 HL 100, HL 100 K
![](/manual_guide/products/stihl-hl-100-135186-product-instruction-manual-7709fc8/26.png)