Stihl HL 100 135186 Product Instruction Manual - Page 15
English
![]() |
View all Stihl HL 100 135186 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Vertical Cut (with straight cutter bar) Overhead Cut (with cutter bar at an angle) English Horizontal Cut (with straight cutter bar) 389BA050 KN 388BA031 KN 388BA033 KN Extra long reach without the need for other aids. Swing the cutter bar up and down in an arc as you move along the hedge - use both sides of the cutting blades. Hold the hedge trimmer vertically and swing it in an arc to make maximum use of its reach. WARNING Any working position above head height is tiring. To minimize the risk of accidents, work in such positions for short periods only. Set angle of adjustable cutter bar to maximum so that the unit can be held in a lower, less tiring position (with shoulder strap) while still providing adequate reach. Cutting without standing directly next to the hedge, e.g. flowerbed between operator and hedge. Hold the cutter bar at an angle of 0° to 10° as you swing the hedge trimmer horizontally. Swing the cutter bar in an arc towards the outside of the hedge so that the cuttings are swept to the ground. HL 100, HL 100 K 13
![](/manual_guide/products/stihl-hl-100-135186-product-instruction-manual-7709fc8/15.png)