Stihl FS 70 Instruction Manual - Page 36
STIHL DuroCut, STIHL FixCut
View all Stihl FS 70 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
English Adjusting Nylon Line STIHL SuperCut Fresh line is advanced automatically if the remaining line is at least 6 cm (2 1/2 in) long. The blade on the deflector trims overlong lines to the correct length. STIHL AutoCut N With the engine running, hold the rotating mowing head above the grass surface. N Tap it on the ground once - fresh line is advanced and the blade on the deflector trims it to the right length. Fresh line is advanced every time the mowing head is tapped on the ground. For this reason observe the mowing head's cutting performance during operation. If the mowing head is tapped on the ground too often, the line limiting blade will unnecessarily cut off unused lengths of nylon line. Line feed operates only if both lines are still at least 2.5 cm (1 in) long. STIHL TrimCut WARNING To reduce the risk of injury, always shut off the engine before adjusting the nylon line by hand. N Pull the spool up - rotate it about 1/6 turn counterclockwise until it engages - and allow it to spring back. N Pull ends of the lines outward. Repeat the above procedure as necessary until both lines reach the limiter blade on the deflector. Rotating the spool from one stop to the next advances about 4 cm (1 1/2 in) of fresh line. Replacing Nylon Line STIHL PolyCut Precut lengths of nylon line can be fitted to the PolyCut in place of the cutting blades. STIHL DuroCut, STIHL FixCut, STIHL PolyCut WARNING To reduce the risk of injury, always shut off the engine before refilling the mowing head. N Fit precut lengths of nylon line in the mowing head as described in the instructions provided. Replacing Cutting Blades STIHL PolyCut Always check the mowing head for signs of wear before installing new cutting blades. WARNING If there are signs of serious wear, replace the complete mowing head. The thermoplastic cutting blades are referred to as "blades" in the following. The mowing head is supplied with illustrated instructions for replacing the blades. Keep the instructions for the mowing head in a safe place. WARNING To reduce the risk of injury, always shut off the engine before installing the blades. N Remove the mowing head. N Replace blades as shown in the illustrated instructions. N Mount the mowing head on the machine. 34 FS 70 R