Stihl FC 85 Instruction Manual - Page 17
Fitting the Cutting Blade, together
![]() |
View all Stihl FC 85 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
English / USA Fitting the Cutting Blade 1 1 2 : Press down the trigger interlock (1) and squeeze the throttle trigger (2) all the way (full throttle position) - this sets the throttle cable correctly. : Place the power edger on a suitable support so that the blade mounting (1) faces upwards. 5 6 4 2 3 002BA161 KN 245BA010 KN 406BA005 KN : Insert stop pin* or Allen wrench* (2) as far as possible in the bore (3) - push lightly and rotate it back and forth together with the thrust washer (4) until the drive shaft is blocked. : Apply combination wrench (5) to screw (6). : Loosen screw clockwise (left-hand thread) and take it out. : Remove retaining ring, plain washer and thrust washer. * see "Guide to Using this Manual" 16 FC 85
![](/manual_guide/products/stihl-fc-85-instruction-manual-cab7746/17.png)
16
English / USA
FC 85
:
Press down the trigger interlock (
1
)
and squeeze the throttle trigger (
2
)
all the way (full throttle position) –
this sets the throttle cable correctly.
:
Place the power edger on a
suitable support so that the blade
mounting (
1
) faces upwards.
:
Insert stop pin* or Allen wrench* (
2
)
as far as possible in the bore (
3
) –
push lightly and rotate it back and
forth
together
with the thrust
washer (
4
) until the drive shaft is
blocked.
:
Apply combination wrench (
5
) to
screw (
6
).
:
Loosen screw
clockwise (left-hand
thread) and take it out.
:
Remove retaining ring, plain washer
and thrust washer.
*
see "Guide to Using this Manual"
2
1
002BA161 KN
Fitting the Cutting Blade
1
245BA010 KN
6
3
406BA005 KN
2
4
5