Sony STR-ZA5000ES Help Guide Printable PDF - Page 88
Locking settings of the receiver Settings Lock, Operating the receiver with the menu on the display
View all Sony STR-ZA5000ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
1080p/60Hz 480p/60Hz Off * When [HDMI Out B Mode] is set to [Zone2], this setting does not appear in [Test Picture for HDMI Out B]. Hint You can also display a test screen with 480p/60 Hz for HDMI OUT A and HDMI OUT B jacks by pressing TEST PICTURE on the remote control. HDMI audio signals are not output while the test screen is displayed. [162] Adjusting Settings Install Setup Locking settings of the receiver (Settings Lock) You can lock the receiver settings to prevent setting values from being accidentally erased. 1 Select [Setup] - [Install Setup] from the home menu. 2 Select [Settings Lock]. 3 Select [On]. Hint To set this function to [Off], press PING, AMP MENU and ENTER on the receiver at the same time. [163] Adjusting Settings Using the menu on the display panel Operating the receiver with the menu on the display panel You can operate this receiver using the display panel even if the TV is not connected to the receiver or the TV is turned off. 1 Press AMP MENU. The menu is displayed on the display panel of the receiver. 2 Press / repeatedly to select the menu you want, then press . 3 Press / repeatedly to select the parameter you want to adjust, then press . 4 Press / repeatedly to select the setting you want, then press . To return to the previous display Press or RETURN. To exit the menu Press AMP MENU. Note Some parameters and settings may appear dimmed on the display panel. This means that they are either unavailable or fixed and unchangeable. [164] Adjusting Settings Using the menu on the display panel Viewing information on the display panel The display panel provides various information on the status of the receiver, such as the sound field. 1 Select the input for which you want to check information. 2 Press DISPLAY repeatedly.