Sony STR-ZA5000ES Help Guide Printable PDF - Page 45
Enjoying more natural sound with speakers installed, in the ceiling In-Ceiling Speaker Mode,
View all Sony STR-ZA5000ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
[57] Enjoying Video and Sound Enjoying sound effects Enjoying more natural sound with speakers installed in the ceiling (In-Ceiling Speaker Mode) Set whether or not to use In-Ceiling Speaker Mode with the current input. In a setup where the front and center speakers are installed in the ceiling, lowering the audio output position to the screen height allows you to enjoy a more natural experience. 1 Select [Setup] - [Audio Setup] from the home menu. 2 Select [In-Ceiling Speaker Mode]. 3 Select the setting you want. Front & Center: Lowers the audio output position for both the front and center speakers installed in ceiling to the screen height. Front: Lowers the audio output position for the front speakers installed in ceiling to the screen height. Off: Does not activate this function. Note This function does not work in the following cases: [Direct] is being used and an analog input is selected. Dolby Atmos enabled speakers are used. Dolby Atmos is being decoded. [Pure Direct] is set to [On]. This function may not work depending on the audio format. The receiver may play signals at a lower sampling frequency than the actual sampling frequency of the input signals depending on the audio format. Hint You can also switch this function on/off for each input on the Input Setup screen. You can also select [In-Ceiling Speaker Mode] in [Sound Effects] from the home menu. You can also switch the function on/off by pressing IN-CEILING SP on the remote control or the receiver. To obtain optimal effects in the listening environment, configure the [Ceiling Height] setting and perform Auto Calibration. [58] Enjoying Video and Sound Enjoying sound effects Enjoying high-fidelity sound (Pure Direct) You can enjoy higher-fidelity sound from all inputs using the Pure Direct function. When the Pure Direct function is on, the display panel lights off to suppress noise that affects sound quality. 1 Select [Sound Effects] - [Pure Direct] from the home menu. 2 Select [On]. Canceling Pure Direct The Pure Direct function will be canceled when you perform the following: Select [Off] in step 2. Press PURE DIRECT. Change the sound field. Change the scene setting on the TV (Scene Select). Change the setting of [Equalizer], [Sound Optimizer], [Dynamic Range Compressor] or [InCeiling Speaker Mode]. Note [Equalizer], [Sound Optimizer], [Dynamic Range Compressor] and [In-Ceiling Speaker Mode] do not work when the Pure Direct function is selected. Hint You can also use PURE DIRECT to turn the Pure Direct function on or off. You can also select [Pure Direct] in the [Audio Setup] menu.