Sony SNCWR602 User Manual (SNC-WR600-602-630-632 user guide) - Page 27

Administrating the Camera Note Audio may be interrupted depending on the selected bandwidth. In this case, select a wider bandwidth. This function is not available when the setting is set to 0. OK/Cancel See "Buttons common to every menu" on page 20. Audio Tab Audio sending Make settings for sending audio from the m microphone input connector. Enable Select the checkbox if you want to send audio from the network camera. Note When you change the Audio setting, click Refresh on the Web browser to reflect the change on the opening live viewer page. Audio in Select microphone input or line input. Mic volume When the Audio in is set to microphone input, set the volume level of the audio input from the m microphone input connector. It is adjustable from -10 to +10. Audio codec Select the codec type of audio from the m microphone input connector. The bit rate may differ, depending on the codec type. Note No audio is output if the Plug-in free viewer is used. Audio upload Using SNC audio upload tool, you can output audio that is input to the computer's audio input terminal from a powered speaker connected to the line output jack of the camera. Enable Select the checkbox to enable the audio upload function. Volume Set the speaker volume level from - 10 to + 10. OK/Cancel See "Buttons common to every menu" on page 20. Superimpose Tab Select whether or not to superimpose the custom string and the character date & time on the image. Notes • For setting the superimposing, set Image size1 in the Video codec tab of the Video / Audio menu to the maximum rate. • Deselect the checkbox of Stabilizer in the Installation tab of the System menu. After setting superimpose, set the Stabilizer function again. Preview screen Preview the image, and adjust the superimposed image. You can move the position of superimposed image displayed on the preview screen by drag and drop. Image Select the video codec mode to set for the superimposed image. The setting for the superimposed image is available if you select the checkbox next to the list box. For details about the video codec mode, see the Video codec tab in the Video / Audio menu. Position Select the number of the display position or logo, on the preview screen. When Logo is selected, the logo file setting is displayed. Note Permissible logo file specifications; File format: PNG8 with alpha channel Image size: 160 × 120 or smaller Width (pixels): multiples of 16 When display position number 1, 2 or 3 is selected, the following setting menus appear. Type Set the type of display information to codec, date & time, event, text or camera direction. Custom string Describes the superimposed content for each position. For Type setting, codec is displayed as , date & time is displayed as , event is displayed as , camera direction is displayed as , and you can add a custom string. 27 Setting the Camera Image and Audio - Video / Audio Menu