Sony HVR-Z7E Operation Guide - Page 55
Locating a scene on a tape, Searching for a scene by date of recording (Date search)
View all Sony HVR-Z7E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Locating a scene on a tape Recording/Playback A B C b Notes • See page 136 for details on how to use the Remote Commander. Searching for a scene by date of recording (Date search) You can search scenes by recording dates. 1 Set the POWER switch to VCR. 2 Press the SEARCH M. button A on the Remote Commander repeatedly to select [DATE SEARCH]. 3 Press the . (previous)/> (next) button B on the Remote Commander to select a recording date. You can select a date previous or next to the date of the current tape position. Playback automatically starts from the scene recorded on the selected date. To cancel the operation Press the STOP button C on the Remote Commander. b Notes • Each day of recording must be longer than 2 minutes. Your camcorder may not detect the date if the recording of that date is short. • The date search may not work properly if a blank section exists on the tape. Searching for a recording start point (Index search) You can search scenes by indexes recorded at the start of recording (p. 44). 1 Set the POWER switch to VCR. 2 Press the SEARCH M. button A on the Remote Commander repeatedly to select [INDEX SEARCH]. 3 Press the . (previous)/> (next) button B on the Remote Commander to select an index point. You can select an index previous or next to the index of the current tape position. Playback automatically starts from the scene marked by the index. Continued , 55