Sony HVR-Z7E Operation Guide - Page 105
to the next., You cannot record a smooth transition on a tape from the last recorded scene
View all Sony HVR-Z7E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
Troubleshooting Recording The recording does not start when you press the REC START/STOP button. • Slide the POWER switch to CAMERA (p. 24). • The tape has reached the end. Rewind it, or insert a new cassette. • Set the write-protect tab of the cassette to REC or insert a new cassette (p. 116). • The tape is stuck to the drum due to moisture condensation. Remove the cassette and leave your camcorder for at least 1 hour, then re-insert the cassette (p. 123). • Set [REC CTL MODE] of [EXT REC CTRL] to other than [EXT ONLY] (p. 86). The handle zoom does not work. • Set the handle zoom speed switch to FIX or VAR (p. 27). You cannot record on the "Memory Stick Duo." • Assign [PHOTO] to an ASSIGN button (p. 43). • The "Memory Stick Duo" is full. Delete unnecessary pictures recorded on the "Memory Stick Duo" (p. 119). • Format the "Memory Stick Duo" on your camcorder (p. 89) or insert another "Memory Stick Duo" (p. 22). • You cannot record still images on the "Memory Stick Duo" in the following cases. - While executing [FADER] - While executing [SMTH SLW REC] - When the shutter speed is set to slower than 1/50 - While using shot transition - When [SCAN TYPE] is set to [25] You cannot record a smooth transition on a tape from the last recorded scene to the next. • Do not record progressive pictures in different [REC TYPE] settings on the same tape. • Perform End search (p. 45). • Do not remove the cassette (the picture will be recorded continuously without a break even when you turn the power off). • Do not record pictures in the HDV and DVCAM (DV) formats on the same tape. • Do not record pictures in DVCAM mode and DV SP mode on the same tape. • When [QUICK REC] is set to [ON], you cannot record a smooth transition (p. 92). The shutter sound is not heard when you record a still image. • Set [BEEP] to [ON] (p. 92). • No shutter sound will be outputted during movie recording or while an external device is connected. Continued , 105