Sony HT-CT350 Operating Instructions - Page 50
volume NIGHT MODE, sound DUAL MONO
UPC - 027242783980
View all Sony HT-CT350 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Enjoying multiplex broadcast sound (DUAL MONO) You can enjoy multiplex broadcast sound when the system receives an AC-3 multiplex broadcast signal. Note • To receive an AC-3 signal, you need to connect a digital satellite tuner to the system with an optical cable or coaxial cable, and set the digital output mode of the digital satellite tuner to AC-3. 1 Select "AUDIO" in the AMP menu, then press or c. 2 Select "DUAL MONO," then press or c. 3 Select the setting and press . • MAIN: Plays back only the main channel. • SUB: Plays back only the sub channel. • MAIN/SUB: Main sound is output from the left speaker and sub sound is output from the right speaker. Enjoying the sound at low volume (NIGHT MODE) You can enjoy sound effects and hear the dialog clearly even at a low volume level using this function. 1 Select "AUDIO" in the AMP menu, then press or c. 2 Select "NIGHT MODE," then press or c. 3 Select the setting and press . • ON: Turns on the "NIGHT MODE" function. • OFF: Turns off the function. Tip • You can listen to Dolby Digital sound at low volume by using AUDIO DRC (page 49). Setting the sound from the satellite tuner (INPUT MODE) Even if you connect the satellite tuner to the HDMI SAT/CATV input jack of the system, multi-channel sound may not be output depending on the satellite tuner. In this case, connect a digital optical cord to the SAT/CATV OPT IN jack of the system in addition to an HDMI cable, and make the following setting. 1 Select "AUDIO" in the AMP menu, then press or c. 2 Select "INPUT MODE," then press or c. 3 Select "OPT" and press . • AUTO: Preferentially output the sound signal from the HDMI SAT/ CATV input jack. • OPT: Output the signal from the SAT/ CATV OPT IN jack. Changing the brightness of the front panel display (DIMMER) The brightness of the front panel display can be set to one of 2 levels. 1 Select "SYSTEM" in the AMP menu, then press or c. 2 Select "DIMMER," then press or c. 3 Select the setting and press . • ON: Dim. • OFF: Bright. 50US