Singer Prelude 8280 8280 Stitch Applications Guide - Page 10
An Edge Joining Foot additional
View all Singer Prelude 8280 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
English 41 ZIGZAG STITCH 42 ZIGZAG STITCH 43 ZIGZAG STITCH Lettuce Edging Attaching Lace Edge Joining hem as you go. The needle will make small holes in the fabric, creating a delicate finish. Best results come when sewing organdy, organza or batiste. A fabric spray starch can make fabrics easier to manage, as well. Sew a zigzag stitch to create a "wavy" hem, sometimes called a "lettuce edge". This technique is for stretch knit fabrics such as t-shirt or jersey. Set the machine for the zigzag stitch. For machines with adjustable stitch length and stitch width, select a medium stitch length and stitch width setting. Sew along the raw edge of the fabric, stretching the fabric from both front and back as you go. When you release the fabric, the result is a wavy, curly edge. Heirloom sewing incorporates several different techniques, and one is to attach lace using a zigzag stitch. This works on fine, lightweight fabrics like batiste and lace that has a flat edge on one side. Thread the machine with lightweight thread. A size 9/70 or 11/80 needle (additional accessory for some machine models) is recommended. Set the machine for zigzag stitch. For machines with adjustable stitch length and stitch width, select a width setting of at least 5.0mm and a length setting of approximately 2.0mm. Use an Open Toe Foot (additional accessory for some machine modeles) so that the area in front of the needle is unobstructed. Position the lace on top of the fabric about 1/8" to the left of the fabric edge, then position this so the right movement of the zigzag goes off the edge of the fabric and the left movement catches the flat edge of the lace. As the stitch then moves to the left, it "rolls" the fabric over, stitching it to the lace. Two fabrics can be joined together using a zigzag stitch. First, turn under and press the edge of both fabrics. An Edge Joining Foot (additional accessory for some machine models) can be used a a guide for the fabrics. Place the folded edges next to each other, one on each side of the foot's center guide, and place a piece of lightweight stabilizer underneath the area where they join. Select the zigzag stitch. For machines with adjustable stitch length and stitch width, select the length and width setting you want for your project. Sew across the area where the fabrics join, so the left movement of the needle sews on the left fabric, and the right movement of 10 of 50