Sharp XV-Z200U XVZ200U Operation Manual - Page 68
Specifications - dlp projector
![]() |
UPC - 074000364028
View all Sharp XV-Z200U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Specifications Product type Projector Model XV-Z200U Video system PAL/PAL 60/PAL-M/PAL-N/SECAM/NTSC 3.58/NTSC 4.43 DTV 480I/480P/720P/1080I Display method DLP chip, RGB optical shutter method DLP panel Panel size: 0.6Љ Display method: Single Panel Digital Micromirror Device (DMD™) by Texas Instruments Drive method: Digital Light Processing (DLP™) No. of dots: 589,824 dots (1,024 [H] ן576 [V]) Lens 1-1.2 ןzoom lens, F1.75-2.04 f=28.0-33.5 mm Projection lamp 210 W/168 W SHP lamp Video input signal RCA Connector: VIDEO (INPUT 4), composite video, 1.0 Vp-p, sync negative, 75 Ω terminated S-video input signal 4-pin Mini DIN connector (INPUT 3) Y (luminance signal): 1.0 Vp-p, sync negative, 75 Ω terminated C (chrominance signal): Burst 0.286 Vp-p, 75 Ω terminated Component input signal RCA Connector (INPUT 1) Y: 1.0 Vp-p, sync negative, 75 Ω terminated PB: 0.7 Vp-p, 75 Ω terminated PR: 0.7 Vp-p, 75 Ω terminated Component input signal 29-pin connector (INPUT 2) DVI input signal: Digital 250-1,000 mV 50 Ω Analog 0.7 Vp-p 75 Ω Y: 1.0 Vp-p, sync negative, 75 Ω terminated PB: 0.7 Vp-p, 75 Ω terminated PR: 0.7 Vp-p, 75 Ω terminated Horizontal resolution 520 TV lines (NTSC 3.58 input) RGB input signal DVI-I terminal Input impedance 50 Ω Input level 250-1000 mV Input impedance 75 Ω Input level 0.7 Vp-p • Separate sync/Composite sync Input level TTL level Input impedance 1 KΩ • Green on sync Input level (Synchronizing input) 0.286 Vp-p Input impedance 75 Ω Pixel clock 12-80 MHz Vertical frequency 43-75 Hz Horizontal frequency 15-70 kHz Computer control signal 9-pin D-sub connector (RS-232C Port) Rated voltage AC 100-240 V Input current 3.2 A Rated frequency 50/60 Hz Power consumption 285 W Heat dissipation 1,070 BTU/hour Operating temperature 41°F to 95°F (ם5°C to ם35°C) Storage temperature מ4°F to 140°F (מ20°C to ם60°C) Cabinet Plastic I/R carrier frequency 38 kHz Dimensions (approx.) 141⁄2Љ (W) ן69⁄16Љ (H) ן127⁄8Љ (D) (368 ן153.8 ן327 mm) (including swivel stand) 141⁄2Љ (W) ן45⁄8Љ (H) ן127⁄8Љ (D) (368 ן118 ן327 mm) (main body only) Weight (approx.) 10.1 lbs. (4.6 kg) (including swivel stand) 9.0 lbs. (4.1 kg) (main body only) Supplied accessories Remote control, Two AA size batteries, Power cord, Terminal cover, Lens cap (attached on the body), Operation manual, Screws for terminal cover Replacement parts Lamp unit (Lamp/cage module) (BQC-XVZ200++1), Remote control (RRMCGA218WJSA), AA size batteries, Power cord (QACCDA007WJPZ), Terminal cover (GCOVAA116WJKB), Lens cap (CCAPHA004WJ01), Operation manual (TINSB005WJZZ), Screws for terminal cover (XBBSN40P10000) This SHARP projector uses a DMD chip. This very sophisticated chip contains 589,824 pixels. As with any high technology electronic equipment such as large screen TVs, video systems and video cameras, there are certain acceptable tolerances that the equipment must conform to. This unit has some inactive pixels within acceptable tolerances which may result in inactive dots on the picture screen. This will not affect the picture quality or the life expectancy of the unit. If you have any questions about this matter, please call toll free 1-877-DTV-SHARP (1-877-3887427). U.S.A. ONLY Specifications are subject to change without notice. -67 Appendix XV_Z200U_E_p67_72.p65 67 03.10.21, 4:27 PM
![](/manual_guide/products/sharp-xvz200u-xvz200u-operation-manual-e8035cd/68.png)