Sharp XV-Z12000 XV-Z12000 Operation Manual - Page 10

Quick Guide

Get Sharp XV-Z12000 - SharpVision - DLP Projector PDF manuals and user guides View all Sharp XV-Z12000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 10 highlights

Introduction Quick Guide In this page, connection of the projector and the video equipment is explained as an example for the procedure from setup to projection. Refer to each page for details. Required equipments Projector Remote control • Insert the batteries. (Page 13) Power cord Video equipment Composite video cable (commercially available) 1. Place the projector facing a wall or a screen. 2. Connect to video equipment. (Page 17) 6. Turn the projector on using on the remote control. (Page 34) ON button INPUT 4 button The power indicator illuminates blue. Composite video cable (commercially available) To INPUT 4 terminal 7. Press on the remote control to select the INPUT 4 mode. (Page 35) "On-screen Display 8. Turn on the video equipment. To video out- ON put terminal 3. Connect the output terminal of the video equipment to the input terminal of the audio equipment using an audio cable. 4. Plug the power cord into the AC socket of the projector and into the wall outlet. (Page 16, 34) 5. Remove the lens cap from the lens. (Page 10) 9. Play the video. 10. Adjust the image size, image position and the focus. (Page 28, 29) Adjust the focus by rotating the focus ring. Adjust the zooming by moving the zoom knob. Lens cap Adjust the height of the image by rotating the lens shift dial. Power cord Note • This projector can also be connected to a computer as well as to video equipment. (Page 22) -9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
Introduction
-9
In this page, connection of the projector and the video equipment is explained as an example
for the procedure from setup to projection. Refer to each page for details.
Quick Guide
Required equipments
Composite video cable
(commercially available)
Projector
Remote control
•
Insert the batteries.
(Page
13
)
Power cord
1.
Place the projector facing a wall or a screen.
2.
Connect to video equipment. (Page 17)
6. Turn the projector on using
on the remote
control. (Page 34)
3.
Connect the output terminal of the video equip-
ment to the input terminal of the audio equip-
ment using an audio cable.
4. Plug the power cord into the AC socket of the
projector and into the wall outlet. (Page 16, 34)
5.
Remove the lens cap from the lens. (Page 10)
7. Press
on the remote control to select the
INPUT 4 mode. (Page 35)
"
On-screen Display
8.
Turn on the video equipment.
To INPUT 4
terminal
To video out-
put terminal
INPUT 4 button
ON button
The power indicator
illuminates blue.
ON
Adjust the height of
the image by rotating
the lens shift dial.
Adjust the focus by
rotating the focus ring.
Adjust the zooming by
moving the zoom knob.
Power cord
Video equipment
Lens cap
Composite video cable
(commercially available)
9.
Play the video.
10
. Adjust the image size, image position and the
focus. (Page 28, 29)
Note
•
This projector can also be connected to a computer
as well as to video equipment. (Page
22
)