Sharp XGC430X|XGC330X Quick Guide - Page 26

Controlling the Projector via LAN Setting and Adjusting the Projector (Settings & Adjustments) Example: "Picture" screen display for INPUT 1 Setting the Security (Network - Security) On these screens, you can make projector settings or adjustments.You can set or adjust the following items : • Picture Mode • CLR Temp • Progressive (Video) • Signal Type (Computer, DVI) • Dynamic Range (DVI) • Video System (Video) • Resolution Setting • Auto Sync • Resize • Auto Keystone • OSD Display • Background • Eco/Quiet Mode • Auto Power Off • System Sound • Menu Position • Direct Power On • Password • Internal Speaker • Audio Out • Projection Mode • Fan Mode • Monitor Out • RS-232C Speed • All Reset • Language Note • If you click the "Refresh" button before the screen is displayed completely, an error message ("Server Busy Error") will be displayed. Wait for a moment and then operate again. • You cannot operate this page while the projector is warming up. • For details about each item, refer to the projector's operation manual. -26 On this screen, you can make settings relating to security. Items Description User Name Setting of user name for security protection. Password Setting of password for security protection. Accept IP It is possible to set up to three Address IP addresses allowing connec- tion to the projector. All IP No limits are set to IP addresses Addresses connecting to the projector. From only For security improvement, only an specific IP IP address set by "Address 1-3" addresses can be connected to the projector. Note • User Name and Password can be up to 8 characters. • You can input the characters below : a-z, A-Z, 0-9, -, _