Sharp XGC430X|XGC330X Quick Guide - Page 21
Setting up Network Connection for the Pro
![]() |
View all Sharp XGC430X|XGC330X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Setting up the Projector Network Environment 5 Click "Internet Protocol (TCP/IP)", and click the "Properties" button. 1 2 6 Confirm or change an IP address for the setup computer. 1 Confirm and note the current IP address, Subnet mask and Default gateway. Make sure to note the current IP address, Subnet mask and Default gateway as you will be required to reset them later. 2 Set temporarily as follows : IP address : 192.168.150.3 Subnet mask : 255.255.255.0 Default gateway : (Do not input any values.) Note • When "DHCP Client" is set to "OFF" on the projector: IP address : 192.168.150.2 Subnet mask : 255.255.255.0 Default gateway : 0.0.0.0 7 After setting, click the "OK" but- ton, and then restart the computer. After confirming or setting, proceed to "3. Setting up Network Connection for the Projector". -21
![](/manual_guide/products/sharp-xgc430xxgc330x-quick-guide-e0d907b/21.png)