Sharp XG-P560W-N XG-P560W Operation Manual - Page 79
Attaching the Optional Lens
![]() |
View all Sharp XG-P560W-N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Attaching the Optional Lens Do not attempt to exchange the lens when the projector is installed hanging from the ceiling. Injury may occur if the lens cover and lens fall. Before exchanging the lens, reset lens shift to the center position. (The lens shift is located at the center in the factory preset.) When resetting the lens shift to the center position, press H&V LENS SHIFT and then press UNDO. • The lens shift reset screen will be displayed. Select "Yes" to reset. 1 Press STANDBY on the projector or on the remote control to put the projector into standby mode. • Disconnect the power cord and unplug the power cord from the AC socket after the cooling fan stops. 2 Remove the lens cover. • Press the lens cover removal button (1). Slide the lens cover forward (2). STANDBY button H&V LENS SHIFT button UNDO button Power cord 3 Turn the lens in the direction of the arrow while pressing the lens re- moval lever to pull the lens out. Removal lever Appendix -77
![](/manual_guide/products/sharp-xgp560w-xgp560w-operation-manual-46498d8/79.png)