Sharp XG-MB70XA XG-MB70X Operation Manual - Page 32
Connecting to a Monitor with RGB input terminal, Connecting to an Amplifier or Other Audio Equipment
View all Sharp XG-MB70XA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Connecting to a Monitor with RGB input terminal You can display computer images on both the projector and a separate monitor using two sets of RGB cables. Monitor Computer Supplied accessory RGB cable To RGB input terminal To INPUT 1 terminal To RGB output terminal To OUTPUT(INPUT 1, 2) terminal RGB cable RGB cable (commercially available) Note • RGB signals and Component signals can be output to the monitor. • For this connection, another RGB cable (commercially available) is required. Connecting to an Amplifier or Other Audio Equipment Audio signals input from equipment connected to each audio input terminal of the projector can be output to audio equipment. Amplifier To AUDIO OUTPUT terminal To audio input terminal ø3.5 mm minijack to RCA audio cable (commercially available) Note • ø3.5 mm minijack to RCA audio cable (commercially available) is required for audio input. • Turn off the power of both the projector and audio equipment when connecting. • When turning off the power in the case of connecting an amplifier or other audio equipment, first turn off the power of the amplifier and then turn off the power of the projector. • By using external audio components, the volume can be amplified for better sound. • For details on Variable Audio Output (VAO) and Fixed Audio Output (FAO), see page 58. -28