Sharp SY-SAT50DV SD-AT50DV SYS-AT50DV Operation Manual - Page 29
Setting the clock
![]() |
View all Sharp SY-SAT50DV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Setting the clock By setting the AV control unit on time, you can use it not only as a clock but also for timer playback. [Front] 3 Press the or button to adjust the "AM 12:00" is 12 o'clock midnight. hour and then press the ENTER but- "PM 12:00" is 12 o'clock noon. ton. SD-AT50 DX-AT50 ENGLISH Preparation for Use - Setting the clock - In this example, the clock is set for 9:30 AM. 1 Press the TIMER button. 2 Within 5 seconds, press the ENTER button. ! Press the or button once to advance the time by 1 hour. Hold it down to advance continuously. ! The 12-hour display will appear. ! "AM" will change to "PM" automatically. 4 Press the or button to adjust the minutes and then press the ENTER button. ! Press the or button once to advance the time by 1 minute. Hold it down to advance continuously. ! The hour will not advance even if minutes advance from "59" to "00". ! The clock starts from "0" second. (Seconds are not displayed.) ! The display returns to normal after approx. 2 seconds. To confirm the time display: Press the TIMER button on the remote control. The time display will appear for about 5 seconds. Caution: Unplugging the DVD player and the subwoofer/amplifier unit or power failure will clear the clock setting. Readjust the clock. To readjust the clock: Perform "Setting the clock" from the beginning. ! In step 1, the time will be displayed. ! Follow steps 2 - 4. Note: You can set the clock even when the power is off. E-24
![](/manual_guide/products/sharp-sdat50dv-sdat50dv-sysat50dv-operation-manual-9acd9c7/29.png)