Sharp SY-SAT50DV SD-AT50DV SYS-AT50DV Operation Manual - Page 18

SD-AT50 DX-AT50 ENGLISH Antenna connection Supplied FM antenna: Connect the FM antenna wire to the FM 75 OHMS jack and position the FM antenna wire in the direction where the strongest signal can be received. Supplied AM loop antenna: Connect the AM loop antenna wire to the AM and GND terminals. Position the AM loop antenna for optimum reception. Place the AM loop antenna on a shelf, etc., or attach it to a stand or a wall with screws (not supplied). White Black TV connection Caution: Before connecting the TV, turn off all the equipment. " Connecting to TV with video cable To video output jack Notes: ! Placing the antenna on the system or near the AC power cord may cause noise pickup. Place the antenna away from the system for better reception. ! When static is still heard even after adjusting the position of the AM loop antenna, try reversing the wire connections. Installing the AM loop antenna: < Assembling > < Attaching to the wall > Video cable (supplied) TV Preparation for Use - Antenna connection / TV connection - Wall Screws (not supplied) Outdoor FM or AM antenna: Use an outdoor FM or AM antenna if you require better reception. Consult your dealer. Outdoor FM antenna 49 feet (15 m) Outdoor AM antenna AM loop antenna 25 feet (7.5 m ) To video input jack Notes: ! Change the TV input in accordance with the connected jack. ! Do not connect other equipment between the TV and the DVD player. If they are connected via a VCR, pictures may be distorted. Earth rod Note: When using an outdoor AM antenna, be sure to keep the wire of the AM loop antenna connected. E-13