Sharp PN-HC751 Operation Manual - Page 76
Mode 1, Audio, Video, Audio & Video, Warning Message, Shutdown, Key Lock Settings
View all Sharp PN-HC751 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Setup VGA Options Auto Adjust Clock Phase H.Position V.Position H.Resolution V.Resolution Reset VGA Options Other settings Input Labels Key Lock Settings IR Lock Settings LED Indicator Mute Settings ROTATE 180° Thermal Management Signal Information Monitor Information Factory Reset Enabled when a VGA signal is input. Automatically adjusts settings such as the image position. Adjust this setting when vertical lines appear on the screen or when the size differs at the right and left of the screen. Adjust this setting when noise appears in the horizontal direction, when the characters are blurred, or when the contours are not sharp. Adjusts the horizontal position of the screen. Press the u button to move the screen to the right or the t button to move it to the left. Adjusts the vertical position of the screen. Press the u button to move the screen to the top or the t button to move it to the bottom. The video can be enlarged/reduced in the horizontal direction using this function only when [Standard] is selected in [Aspect Ratio]. N OTE: This function may not operate depending on the input signal. The video can be enlarged/reduced in the vertical direction using this function only when [Standard] is selected in [Aspect Ratio]. N OTE: This function may not operate depending on the input signal. Resets the VGA Options settings to their default values. Renames the input terminal currently being displayed. Letters (A-Z), numbers (0-9), and some symbols can be used. Prevents the monitor from being controlled using the buttons on the monitor control panel. Off: All buttons operate normally. Mode 1: Only the power button and the input mode switching function operate. Mode 2: All buttons are locked. (Only the power button can be used during standby mode.) Prevents the monitor from being controlled using the remote control. Off: All buttons operate normally. Mode 1: Only the POWER and the INPUT buttons operate. Mode 2: All buttons are locked. (Only the POWER button can be used during standby mode.) Set it to Off to turn off the power indicator when the monitor is turned on (normally lit green). You can change the effect of the MUTE button of the remote control. Audio: Mutes only the audio files. Video: Mutes only the video files. Audio & Video: Mutes the audio and the video files. You can rotate the video 180 degrees. You can select the vertical or horizontal installation direction in the sensor settings. The monitor is equipped with thermal sensors and displays a warning when the ambient temperature exceeds the operation guaranteed temperature. If a warning is displayed, turn the monitor off since using the monitor in such environment may cause a malfunction. Warning Message: A temperature warning is displayed on the screen when the internal temperature has exceeded the operation guaranteed temperature. Shutdown: The monitor turns off automatically when the internal temperature has exceeded the operation guaranteed temperature. Displays the information regarding the input signal. Displays the information regarding the monitor. All settings except network are returned to factory default. 73