Sharp PN-HB651 PN-HB Series PN-HM Series Operation Manual - Page 32

Menu Items nDual-screen display You can display two screens simultaneously. Set this function with PIP MODES of PIP/PbyP in the MULTI/ PIP menu. Or, press the PIP/PbyP button, and select the mode. PIP Main screen A sub screen is displayed inside a main screen. Sub screen PbyP Main screen Sub screen A main screen and a sub screen are displayed in a line. nQuad-screen display You can display 4 screens simultaneously. Landscape orientation Portrait orientation Position 1 (1920×1080) Position 2 (1920×1080) Position 3 (1920×1080) Position 4 (1920×1080) Position 2 Position 4 (1080×1920) (1080×1920) Position 1 Position 3 (1080×1920) (1080×1920) PbyP2 Main screen Sub screen Displays a main screen which measures 2560 pixels in the longest direction and a sub screen in a line. * The currently selected input signal is displayed on the main screen. * The following combination is not available for display. HDMI1 - OPTION TIPS • You might infringe on a copyright of the author which is protected by copyright law when you display the images of the computer screen and television/VCR simultaneously for profit-making or to show the image to the public. • The screen size for dual-screen display is the same as the screen size for single-screen display. The Dot by Dot screen is displayed in NORMAL size except when it is set as the PIP main screen. • When dual-screen display is selected, the CONNECT AUTO INPUT SELECT function and NO SIGNAL AUTO INPUT SEL. function are disabled. • When dual-screen display is selected, the AUDIO menu cannot be set. • When dual-screen display is selected, the DISPLAY COLOR PATTERN cannot be set. • When an interlaced signal (1080i, 480i, video) is input to the sub screen, horizontal lines may flicker. If this happens, display the image on the main screen. • When ROTATE 180° is set to ON, you cannot set PIP MODES to PIP, PbyP, or PbyP2. • When HDMI CEC LINK is set to AUTO, SOUND CHANGE on the PIP/PbyP may be changed to MAIN due to the switching of the monitor's input or due to the operation of the HDMI-connected device. • The sub screen does not support HDR signals. Displaying 4 screens 1. Set CONFIGURE QUAD-SCREEN - QUAD-SCREEN MODE to ON in the MULTI/PIP menu. Or, press the PIP/PbyP button, and select the QUADSCREEN. • The 4 screens set in SETTING INITIAL SCREEN appear. • When SAVE LAST INPUT CONFIG. is ON, the previously displayed 4 screens appear. • You can return to the 4 screens set in SETTING INITIAL SCREEN using CONFIGURE QUAD-SCREEN- RECONFIGURE QUAD-SCREEN in the MULTI/PIP menu. Deciding the screen that will be the audio output/input mode selection target Set the screen whose audio is output, and the screen whose input is changed. 1. Set in CONFIGURE QUAD-SCREEN - TARGET:SOUND / INPUT SEL. in the MULTI/PIP menu. Returning to single screen 1. Set CONFIGURE QUAD-SCREEN - QUAD-SCREEN MODE to OFF in the MULTI/PIP menu. Or, press the PIP/PbyP button, and select the OFF. • The screen set in the audio output/input mode selection target is displayed on 1 screen. E 32