Sharp PN-655 PN655U Operation Manual - Page 58
EPC Digital/Analog Signal Input Compatibility Chart - series
![]() |
View all Sharp PN-655 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
PC Digital/Analog Signal Input Compatibility Chart • Video • Sync • Supported frequencies Analog RGB (0.7 Vp-p) [75 Ω] Conforms to DVI (digital visual interface) standard 1.0 Horizontal/Vertical separate (TTL: positive/negative), Sync-on-green, Composite sync (TTL: positive/negative) See the Compatible signal timing shown below. ■ Compatible signal timing Screen resolution VESA 640 x 480 800 x 600 848 x 480 1024 x 768 Wide US TEXT Sun Ultra Series 1152 x 864 1280 x 768 1280 x 960 1280 x 1024 1360 x 768 1280 x 720 1920 x 1080 720 x 400 1024 x 768 1152 x 900 1280 x 1024 1600 x 1000 Hsync 31.5 kHz 37.9 kHz 37.5 kHz 37.9 kHz 48.1 kHz 46.9 kHz 31.0 kHz 48.4 kHz 56.5 kHz 60.0 kHz 67.5 kHz 47.8 kHz 60.3 kHz 60.0 kHz 64.0 kHz 80.0 kHz 47.7 kHz 44.7 kHz 66.3 kHz 31.5 kHz 48.3 kHz 53.6 kHz 56.6 kHz 61.8 kHz 71.8 kHz 71.7 kHz 81.1 kHz 68.6 kHz Vsync 60 Hz 72 Hz 75 Hz 60 Hz 72 Hz 75 Hz 60 Hz 60 Hz 70 Hz 75 Hz 75 Hz 60 Hz 75 Hz 60 Hz 60 Hz 75 Hz 60 Hz 60 Hz 60 Hz 70 Hz 60 Hz 66 Hz 70 Hz 66 Hz 76.2 Hz 67.2 Hz 76 Hz 66 Hz Dot frequency Analog signal Digital signal 25.175 MHz Yes Yes 31.5 MHz Yes Yes 31.5 MHz Yes Yes 40.0 MHz Yes Yes 50.0 MHz Yes Yes 49.5 MHz Yes Yes 33.75 MHz Yes Yes 65.0 MHz Yes Yes 75.0 MHz Yes Yes 78.75 MHz Yes Yes 108.0 MHz Yes Yes 79.5 MHz Yes Yes 102.25 MHz Yes Yes 108.0 MHz Yes Yes 108.0 MHz Yes Yes 135.0 MHz Yes Yes 85.5 MHz Yes Yes 74.4 MHz Yes Yes 148.5 MHz Yes Yes 28.3 MHz Yes Yes 64.13 MHz Yes 70.4 MHz Yes 74.25 MHz Yes 94.88 MHz Yes 108.23 MHz Yes 117.01 MHz Yes 134.99 MHz Yes 135.76 MHz Yes * All are compliant only with non-interlaced. * Depending on the connected PC, images may not be displayed properly even if the compatible signal described above is input. * If the monitor is receiving timing signals that are not compatible, [OUT OF TIMING] may appear. In this case, please change the setting so that the timing signals will be compatible with the monitor, according to your PC manual. * If the monitor is not receiving any signal (sync signal), [NO SIGNAL] will appear. * The frequency values for the Sun Ultra Series are reference values. A separate conversion adapter (commercially available) may be required for connecting the monitor to the Sun Ultra Series. E 56
![](/manual_guide/products/sharp-pn655u-pn655u-operation-manual-26ad750/58.png)