Sharp PG-M10X PG-M10SU , PG-M10XU Operation Manual - Page 34
Initial Settings
View all Sharp PG-M10X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Initial Settings Setting in Accordance With Image Content (continued) Setting Keystone This is used to set the height for keystone adjustment. 1 With the FLIP COVER of the remote control open, press the MENU button to display the Advanced menu, then use the cursor ǡ / Ǡ keys to select "VIEW". 2 Display the frame, then use the cursor / keys to select "KEYSTONE". 3 Use the cursor ǡ / Ǡ keys to select "NORMAL" or "FULL". G Normal: Normal keystone correction G Full: In this mode, the image is enlarged to fill the screen vertically and then Keystone correction is performed. Audio Muting Audio only can be muted for each input. This function is convenient when multiple video units are connected to this unit. 1 Select the input to be muted (page 20). 2 With the FLIP COVER of the remote control open, press the MENU button to display the Advanced menu, then use the cursor ǡ / Ǡ keys to select "SETUP". 3 Use the cursor / keys to select "SOUND MUTE", then use the cursor ǡ / Ǡ keys to set muting to "ON" or "OFF". Selecting the Background Two different backgrounds can be selected for projection when there is no signal input. 1 With the FLIP COVER of the remote control open, press the MENU button to display the Advanced menu, then use the cursor ǡ / Ǡ keys to select "SETUP". 2 Use the cursor / keys to select "BACKGROUND". 3 Use the cursor ǡ / Ǡ keys to select one of the following backgrounds. G Blue G Black Setting the partial display position Input a signal that is rated SXGA (XGA for the PG-M10S) to COMPUTER input terminal and then set the partial display position with "ASPECT" (see page 31) set to "REAL". 1 With the FLIP COVER of the remote control open, press the MENU button to display the Advanced menu, then use the cursor ǡ / Ǡ keys to select "VIEW". 2 Display the frame, use the cursor / keys to select "PAN" and then press the ENTER button. 3 Use the cursor keys to set the display position. Auto Gain Brightness and contrast are adjusted automatically. 1 Select the input to be set for auto gain (page 20). 2 With the FLIP COVER of the remote control open, press the MENU button to display the Advanced menu, then use the cursor ǡ / Ǡ keys to select "SETUP". 3 Use the cursor / key to select "AUTO GAIN", then use the cursor ǡ / Ǡ keys to set "ON" or "OFF". Menu Operation To close the menu Press the R-CLICK/EXIT button. 32