Sharp PG-D50X3D PG-D45X3D PG-D50X3D Operation Manual - Page 49
Adjusting the Projector Function PRJ - ADJ Menu
UPC - 074000374027
View all Sharp PG-D50X3D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Adjusting the Projector Function ("PRJ - ADJ" Menu) Pict. SCR PRJ-ADJ 1 Auto Sync 2 Auto Power Off 3 Auto Restart 4 STANDBY Mode 5 System Sound 6 Audio Out 7 Speaker 8 Audio Input 9 RS-232C 0 Fan Mode System Lock Lamp Timer(Life) 0h Net. Help On On On Standard On VAO On Audio 1 9600bps Normal Disable 0 min 100% SEL./ADJ. ENTER END 1 Auto Sync (Auto Sync Adjustment) Selectable items Description On Auto Sync adjustment will occur when the projector is turned on or when the input signals are switched, when connected to a computer. Off Auto Sync adjustment is not automatically performed. Note • Auto Sync adjustment is also performed by pressing AUTO SYNC. • The Auto Sync adjustment may take some time to complete, depending on the image of the computer connected to the projector. • When the optimum image cannot be achieved with Auto Sync adjustment, use manual adjustments. (See page 51.) 2 Auto Power Off Function Selectable items Description On When no input signal is detected for more than 15 minutes, the projector will automatically enter Standby mode. Off The Auto Power Off function will be disabled. Menu operation n Page 38 3 Auto Restart Function Selectable items Description On If the power cord is unplugged from the outlet or the breaker switch is turned off when the projector is on, then the projector automatically turns on when the power cord is plugged into the AC outlet or the breaker switch is turned on. Off The projector does not turn on automatically when the power cord is plugged into the AC outlet or the breaker switch is turned on. 4 STANDBY Mode When set to "Eco", power consumption is reduced in Standby mode. Selectable items Description Eco The monitor output and Network functions are switched off in Standby mode. Standard The monitor output and Network functions are activated even if the projector is in Standby mode. 5 Setting the Confirmation Sound (System Sound) Selectable items Description On A confirmation sound is made when the projector turns on/off. Off No confirmation sound is made. Useful Features Note • When the Auto Power Off function is set to "On", 5 minutes before the projector enters Standby mode, the message "Enter STANDBY mode in X min." will appear on the screen to indicate the remaining minutes. 45