Sharp PG-D50X3D PG-D45X3D PG-D50X3D Operation Manual - Page 36
Operating with the Remote Control
UPC - 074000374027
View all Sharp PG-D50X3D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Operating with the Remote Control BREAK TIMER button FREEZE button MAGNIFY buttons POINTER button SPOT button Adjustment buttons (P/R/O/Q) EFFECT button PICTURE MODE button ECO+QUIET button AUTO SYNC button Displaying the Pointer 1 Press POINTER and press P/R/ O/Q on the remote control to move the pointer. • Press EFFECT to change the pointer icon (5 types). Star Finger1 Finger2 Heart Underline 2 Press POINTER again. • The pointer will disappear. Displaying and Setting the Break Timer 1 Press BREAK TIMER. • The timer starts to count down from 5 minutes. On-screen display Using the Spot Function 1 Press SPOT and press P/R/O/Q on the remote control to move the spot area. • Press EFFECT to change the spot area size (3 types). 1/9 1/25 1/8 2 Press P/R/O/Q to adjust the length of the break time. • Increases with P or Q 5 minutes ➞ 6 minutes ➞ 60 minutes • Shortens with O or R 4 minutes ➞ 3 minutes ➞1 minute • The break time can be set in units of one minute (up to 60 minutes). Canceling the break timer display function Press BREAK TIMER. Note • The Break Timer is not available while the projector is operating the following functions. - Auto Sync - Freeze - AV Mute 2 Press SPOT again. • The spot area will disappear. Switching the Eco+Quiet Mode Press ECO+QUIET to switch the Eco+Quiet mode between on and off. • When the Eco+Quiet mode is set to "ON", the sound of the cooling fan will turn down, the power consumption will decrease, and the lamp life will extend. Note • Refer to "Eco+Quiet" on page 42 for details. 32