Sharp MX-M6570 MX-M6570 MX-M7570 User Manual - Page 261

COPIER►BASIC PROCEDURE FOR MAKING COPIES Stapling each set of sorted copies The setting procedure in normal mode is explained. 1 Tap the [Detail] key to change to normal mode. ► SELECTING COPY MODE (page 2-4) Tap the [Original] key and specify the orientation of the original to have the orientation be correctly recognized. ► Specifying the orientation of the original (page 2-28) 2 Tap the [Output] key. 3 No. of copies 1 Original Change Size/Direction. Tap the [Staple] tab, and tap the staple Output 2-Sided Copy position key. Output Tray Upper Tray Middle Output Tray Right Tray N-Up Put Multiple Pages in A Page Margin Shift Tap the [Original] key to chenge the original settings. Tray Shift Position to Have Margin Erase Staple position can be selected from "Position" when Lower Tray Offset Separator Page Erase Shadow Around selecting keys other than [Off], [1 Staple (Diagonal)], and Sort/Group Staple Punch Fold Off Position [Saddle Stitch]. 1 Staple Saddle Stitch Left Top Preview CA After the settings are completed, tap . 2 Staples Trimmer Setting Original Right Proof Copy Others 3 8½x14 4 11x17 8½x11 Start • When a finisher or saddle stitch finisher is installed, you can select [1 Staple (Diagonal)] to staple diagonally. • If you perform 1-staple stapling with a finisher (large stacker) or saddle stitch finisher (large stacker) installed, all staples will be stapled diagonally. • If the number of scanned originals exceeds the staple sheet limit, a message is displayed. Tap the [Continue] or [Cancel] key. [Continue]: Continues sorting without stapling. [Cancel]: Cancels the staple sort setting. To cancel the staple function: Tap the [Off] key. 2-42