Sharp MX-M6570 MX-M6570 MX-M7570 User Manual - Page 171
Finisher
View all Sharp MX-M6570 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 171 highlights
BEFORE USING THE MACHINE►PERIPHERAL DEVICES FINISHER This device outputs sorted paper while staggering each set of paper. As needed, it staples each set. You can also perform stapling manually. To punch holes in printed paper, install an optional hole punch module. PART NAMES (1) (2) (3) (4) (5) (6) (1) Output tray (upper tray) The tray is slidable. To print on large paper such as A3 paper, extend the tray. (2) Output tray (lower tray) Stapled and offset output is delivered to this tray. The tray is slidable. To print on large paper such as A3 paper, extend the tray. (3) Manual staple key Press to execute manual stapling. (4) Top cover Open this cover to remove a paper misfeed. (5) Insertion slot Place the paper that you want to staple in this slot. Maximum thickness 9 mm. (6) Front cover Open this cover to replace the staple cartridge or remove a staple jam. • To install a finisher, a paper pass unit is required. • A finisher cannot be installed simultaneously with an inner finisher, finisher (large stacker), saddle stitch finisher or saddle stitch finisher (large stacker). • Do not place heavy objects on the finisher or press down on the finisher. • Exercise caution when you turn on the power and when printing take place, as the tray may move up and down. 1-168