Sharp MX-3070V Operation Manual - MX-2630N - Page 452

FACSIMILE►BASIC TRANSMISSION METHODS SPECIFYING THE ORIGINAL SCAN SIZE USING NUMERIC VALUES When scanning a non-standard size original such as a postcard, specify the original size by numeric values after placing the original. The width can be from 1" to 17" (25 mm to 432 mm), and the height can be from 1" to 11-5/8" (25 mm to 297 mm). When the scan size is specified by numeric values, the send size cannot be specified. 1 Tap the [Detail] key to change to normal mode. ► Changing mode from each mode (page 4-8) 2 Tap the [Original] key. 3 Address Book Address Fax Number Original Scan Size Auto 8½x11 2-Sided Tablet 2-Sided Booklet Others 100% Send Size Auto 8½x11 Image Orientation reception memory 100% Dual Page Scan Divide into 2 Pages N-Up Put Multiple Pages in A Page Slow Scan Mode Scan Thin Paper Original Tap the [Scan Size] key. Preview CA Speaker Start 4 Address Book Address Fax Number Scan Size Auto 8½x11 Dual Page Scan Divide into 2 Pages N-Up Put Multiple Pages in A Page Slow Scan Mode Scan Thin Paper Original Tap the [Direct Entry] key, and enter the scan size. • Tap the areas displaying width and height sizes AB Inch Direct Entry Custom Size respectively, and enter the sizes using the numeric keys. Y 11 (1 ~ 11 5/8) inch • It is convenient to use to finely adjust the entered X 17 (1 ~ 17) inch Preview CA size. Execute Others reception memory 100% Speaker Start 5 Tap the [Enter] key. After the settings are completed, tap twice. On the base screen, check that the specified size is displayed on the [Original] key. To cancel the specified size settings: Tap the [Auto] key. 4-46