Seagate Barracuda XT Barracuda XT Series SATA Product Manual - Page 25

Barracuda XT SATA Product Manual, Rev. D, Configuring and Mounting the Drive,

Add to My Manuals
Save this manual to your list of manuals

www.seagate.com Figure 6 Mounting dimensions (3000GB model) Configuring and Mounting the Drive Barracuda XT SATA Product Manual, Rev. D 25

Section	Page
Barracuda®XT	1
1.0 Introduction	9
1.1 About the Serial ATA interface	9
2.0 Drive Specifications	10
2.1 Formatted capacity	11
2.1.1 LBA mode	11
2.2 Default logical geometry	11
2.3 Recording and interface technology	12
2.4 Physical characteristics	12
2.5 Start/stop times	12
2.6 Power specifications	12
2.6.1 Conducted noise	16
2.6.2 Voltage tolerance	16
2.6.3 Power management modes	16
2.7 Environmental specifications	17
2.7.1 Ambient temperature	17
2.7.2 Temperature gradient	17
2.7.3 Humidity	17
2.7.4 Altitude	17
2.7.5 Shock	18
2.7.6 Vibration	18
2.8 Acoustics	18
2.8.1 Test for Prominent Discrete Tones (PDTs)	19
2.9 Electromagnetic immunity	19
2.10 Warranty	20
2.11 Agency certification	20
2.11.1 Safety certification	20
2.11.2 Electromagnetic Compatibility (EMC)	20
2.11.3 FCC verification	20
2.12 Environmental protection	21
2.12.1 European Union Restriction of Hazardous Substances (RoHS) Directive	21
2.12.2 China Restriction of Hazardous Substances (RoHS) Directive	21
2.13 Corrosive environment	21
3.0 Configuring and Mounting the Drive	23
3.1 Handling and static-discharge precautions	23
3.2 Configuring the drive	23
3.3 Serial ATA cables and connectors	23
3.4 Drive mounting	24
4.0 SATA Interface	27
4.1 Hot-Plug compatibility	27
4.2 Serial ATA device plug connector pin definitions	27
4.3 Supported ATA commands	29
4.3.1 Identify Device command	31
4.3.2 Set Features command	35

Match case Limit results 1 per page

Barracuda XT SATA Product Manual, Rev. D

www.seagate.com

Configuring and Mounting the Drive

Figure 6

Mounting dimensions (3000GB model)